Capita Aeronaut By Arthur Longo Snowboard 2024 | Snowboards Mens | Trojan Wake Ski Snow

Aeronaut By Arthur Longo Snowboard

Description:

The resort maximizer, designed by the side hit master.

Side Hit Euphoria™ has generally been considered an enlightened state. Understood as real on a conceptual level, yet intangible to most that lack an understanding of the methodology required to produce such an experience.

Now, the existential joy of enhanced board control and massive ollie-pops is attainable to all. The all-new Aeronaut series was designed in collaboration with The Rocket Man, Arthur Longo. The goal: to introduce the local-resort maximizer. The result: a semi-old school, respectful nod to the 90s; a directional, cambered snowboard that can meet the most demanding all-mountain pursuits your resort has to offer.

With high-grade components like a HyperDrive™ ADV base, Amplitex V-TECH Amplifiers, and a lightweight and extremely durable Panda Hover Core™, the Aeronaut has the power to charge through terrain at high speeds and pop off any enticing features.

Constructed with narrower waist widths and a progressive sidecut flowing into a slightly tapered tail, the Aeronaut will take those same runs you've ridden a million times and turn them into an all-new playground.

Camber: ALPINE V3

The ALPINE V3 profile has a 7 mm traditional camber that zeros out before the end of the sidecut. The small zero camber sections provide a more controlled ride while retaining the response and power of a cambered board.

Features:

• Shape: Directional 0.8” Setback
• Sidecut: Progressive
• Flex: Directional 6/10
• Rider type: Resort / All-MTN
• Skill level: 5/5
• Terrain versatility: 5/5
• Groomers: 5/5
• Powder: 4/5
• Jumps: 5/5
• Flat trick / Jibbing: 1/5
• Core: PANDA HOVERCORE™
• Additives: 3 x 25 mm AMPLITEX™ V-TECH AMPLIFIER
• Glass + resin: HOLYSHEET™ TRI/BI FIBERGLASS + MAGIC BEAN™ RESIN
• Base: HYPERDRIVE™ ADV

Addition Features:

• Multitech™ Level 4 DeepSpace™ PAM16000™ w/ Pearlescent Underlay
• Silkscreen Base
• 360 Degree HRC48 Steel Edges
• Full ABS1000 Sidewalls
• Stainless Steel 4 x 2 Inserts

Waxing:
Waxing your snowboard is essential. It will keep you moving faster (which is essential on those flat bits or cat tracks) and will prevent your board from drying out, thus extending its life. Waxing isn’t a one-and-she’s-done kind of thing—you’ll need to give your board a good hot wax from time to time. Exactly how often will depend on how much you ride it, but a sure sign that it’s due for a wax is if the base starts to look a little white and you feel like you’re going slower than usual on flat bits. Snowboards typically come with a “factory wax", meaning a wax that was applied in the warehouse when it was made. You can ride the board immediately with the factory wax, but most snowboarders agree that it’s way better to give the board a proper hot wax before you take it out on the snow. Before putting your board away for the final time of the season, be sure to have a storage wax applied to your snowboard.
Sharpen Your Board as Needed
Snowboards can be sharpened at a snowboard shop with a sharpening machine, or with a whetstone and file
Snowboard Bags:
Use a snowboard bag to transport you board around while preventing any potential damage to your board, boots, and bindings.
Boots and bindings:
Before riding, ensure your bindings are attached to your board firmly to prevent any damage at the contact points.
Obstacles:
Exposed rocks and other hard, jagged surfaces are your snowboard’s worst enemy. Ride with care, especially early and late in the season when the coverage isn’t at its best.
Repairs:
If there are any minor gashes on your board, a fresh wax and buff and you should be fine, however any major defects with the board should be repaired or replaced prior to using.
Putting Away:
At the end of each and every day on the mountain, be sure to carefully wipe off any snow that’s stuck to your board. Don’t forget the crevices around the bindings; leaving excess moisture can cause metal parts to rust. At the end of the season, give your board a solid wipe down (especially if it’s covered in spring riding muck), dry it off thoroughly, and melt on a thick layer of wax—which you can scrape off at the start of next season. Store your board in a dry, cool place where it won’t get knocked around.

Shipping:

We uses Auspost for Small Orders, which include items like Life Jackets, Ropes/Handles, Snow Outerwear, Boots, Bindings, etc. For Large items such as Snowboards, Wakeboards, Waterskis, Kneeboards, Large Tubes, etc., we rely on StarTrack. We prioritize quick delivery, so all orders placed before 2 pm from Monday to Friday will be shipped on the same day. Orders placed on the weekend will be shipped on the following Monday. Rest assured, you will receive a confirmation email with a tracking number to monitor your order's progress. If you encounter any issues finding your tracking number, please don't hesitate to Contact Us for assistance. For more comprehensive shipping information, please refer to the details available here.

Returns

At Trojan, we strive for customer satisfaction, and that includes our return policy. You have the option to return any product purchased from us, provided it is not faulty, within 60 days from the date of purchase to receive a full refund. If the item is returned after 60 but within 365 days of purchase, a store credit will be issued. We accept returns of products in their original condition. Customers have the choice of receiving a refund (minus any shipping charges paid) or exchanging the item for a different product. For your convenience, returns can be made in person at our store with proof of purchase or sent back to our store via mail. For further information on our return process, please see here.